Cee Bailey Sport Shield cracking / locktite damage!

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1200R.

Moderator: Moderators

Post Reply
ammolab
Lifer
Posts: 241
Joined: Sun Jul 17, 2011 11:06 pm

Cee Bailey Sport Shield cracking / locktite damage!

Post by ammolab »

I run this shield during the winter. Coming off it's second winter I notice cracking/crazing around the lower mounting holes. Maybe my mounting screws were too tight, too loose? Maybe riding at 80 MPH into our 40 MPH Spring winds put too much stress on that area.

I sent an email to Cee Baileys last week...no reply to date.

Image
Last edited by ammolab on Wed May 14, 2014 5:51 pm, edited 3 times in total.
Red 2011 R1200R
Blue 1986 K75C
Steel Grey 2002 M Coupe
User avatar
MTBeemer
Lifer
Posts: 311
Joined: Fri Feb 17, 2012 10:02 pm
Donating Member #: 1043
Location: Big Sky Country

Re: Cee Bailey Sport Shield cracking

Post by MTBeemer »

I have a set of Cee Bailey's head light protectors on my 2013 FJR. Last weekend something hit the right side and shattered the protector into three pieces; the light lens is undamaged. (I know, not a BMW, but it happened on the way to a BMW event ) I sent Cee Bailey a picture and asked if I could buy just the one side. I had a response in a few hours saying that if I would provide a mailing address they will send me a new set at no charge, including shipping. Had the protectors not been installed I would likely have needed a new headlight unit at $668. You cannot ask for more.
Kevin Huddy
Intrepid Incompetent
Canyon Creek, MT
Team Pterodactyl Montana Outpost
User avatar
dbrick
Lifer
Posts: 721
Joined: Fri Sep 24, 2010 4:36 pm
Donating Member #: 902
Location: Santa Cruz CA

Re: Cee Bailey Sport Shield cracking

Post by dbrick »

My bike has worn a Cee Bailey 16" on the BMW tall bracket since early 2011. I found the bracket used, and between being (I think) damaged before I got it and being bent by me so it'd fit with the Don C block, it's twisted a bit. Each time the screen is dismounted (after a long ride, there's nothing quite so easy as cleaning the bugs off after it's spent an hour soaking in the hot tub), I have to use some force in order to get it seated on its four posts. I keep waiting for crazing or cracking, but so far it hasn't.
David Brick
Santa Cruz CA
2007 R1200R
priors: R50, R50, R69, R69S, R65, FJ1200, K75S, R1100RSL
Clem
Basic User
Posts: 109
Joined: Sun Jun 12, 2011 11:28 am

Re: Cee Bailey Sport Shield cracking

Post by Clem »

Ammolab, sorry to hear about the cracking screen. 80mph into 40mph winds? That's a stout spring breeze. Please keep us posted as to how that turns out for you. Fingers crossed.
Sounds like CeeBailey's gave excellent service to MTBeemer. Good to hear such reviews from satisfied customers. Guard saved you an expensive repair bill.
I usually drape a dripping wet microfiber towell over the screen for a while to loosen up the dried bugs. Works for me.
ammolab
Lifer
Posts: 241
Joined: Sun Jul 17, 2011 11:06 pm

Re: Cee Bailey Sport Shield cracking

Post by ammolab »

Sent them a second email with photo: Image
Red 2011 R1200R
Blue 1986 K75C
Steel Grey 2002 M Coupe
ammolab
Lifer
Posts: 241
Joined: Sun Jul 17, 2011 11:06 pm

Re: Cee Bailey Sport Shield cracking / photo added

Post by ammolab »

2 Emails to Cee Baileys with no response...first email 12 Days ago. Will fax them a note tomorrow!
Red 2011 R1200R
Blue 1986 K75C
Steel Grey 2002 M Coupe
ammolab
Lifer
Posts: 241
Joined: Sun Jul 17, 2011 11:06 pm

Re: Cee Bailey Sport Shield cracking / photo added

Post by ammolab »

They did respond to my fax...said it was Loctite damage. Could be: I read the instructions the first time I mounted it.("no Loctite")...last year, NOPE! Did use Loctite!

They will give me 30% off a new sheild.... I think I will go for that.
Red 2011 R1200R
Blue 1986 K75C
Steel Grey 2002 M Coupe
deilenberger
Honorary Lifer
Posts: 4210
Joined: Thu May 03, 2007 9:21 pm
Donating Member #: 0
Location: New Jersey USA
Contact:

Re: Cee Bailey Sport Shield cracking / locktite damage!

Post by deilenberger »

Interesting. I've never used Loctite - never felt the need. I've never seen any sign of the screws loosening up.. very few things do on the R12R.. (unlike my old British bikes that used to go down the road shedding parts/license-plates/oil/etc..)
Don Eilenberger - NJ Shore
2012 R1200R - I love this bike!
Post Reply