Heated clothing---which brand is best?

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1150R.

Moderator: Moderators

User avatar
Sit
Basic User
Posts: 219
Joined: Fri May 05, 2006 11:31 pm
Donating Member #: 0
Location: Portland, Oregon

Post by Sit »

I ran my gerbings liner off of the acc plug for a while, but it bothered me sticking out as far as it did. Due to having to remove the tank to get to the battery, installed a centech fuse panel and then pigtailed the gernings from it. Much nicer just having the plug end hanging out and left the acc port for other items. I would suggest getting the control unit too. If the warmsafe jacket gets nearly as warm as the gerbings, you will want to be able to turn it down. It takes a few minutes, but on long rides, I adjust the temp so it is almost neutral. I cant imagine using my jacket on constant high. Also would not want to be constantly switching it on and off.
User avatar
towerworker
Lifer
Posts: 2371
Joined: Sun Jan 08, 2006 8:11 pm
Donating Member #: 575
Location: Staunton Virginia

Post by towerworker »

I'm going to have to look into the Centech fuse panel, I've heard alot of references to it here on this board. I have not received my jacket liner yet from WarmnSafe but anxious to try it out. The specs I read indicate it delivers more heat than either the Widder or the Gerbing (or at least it pulls more current) they indicate it pulls a maximum of roughly 100 watts at full on. Properly designed that should translate to more available heat. We'll see.

I did have a conversation with the owner of the company thursday afternoon when I called to ask a question. Again I was impressed with him and his willingness to help. He's an avid motorcyclist.

Oh, and I did order the heat controller as well.

Wayne
Post Reply