Side Cover or Seat Flare

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1150R.

Moderator: Moderators

Post Reply
RadicalR1150R
Lifer
Posts: 144
Joined: Thu May 12, 2011 4:51 pm
Donating Member #: 960
Location: Michigan

Side Cover or Seat Flare

Post by RadicalR1150R »

What have you done to close the gap up front on the "side cover" or seat flare .
The peg no longer adheres to the grommet. I'll order the grommet & in the meantime try to build up the peg with clear RTV to create more of a plug.. Maybe 3M velcro would work also,only you'd have to remove the peg.
kirby
Member
Posts: 771
Joined: Tue Feb 27, 2007 9:04 pm
Donating Member #: 3
Location: mojave ca

Re: Side Cover or Seat Flare

Post by kirby »

Ha! left side no cover..yes? air snorkel to airbox.

Right side...haven't seen it in years(good riddance) got tired of trying to get t on so??? I just have the fuel lines tie rapped together and everything is in plain sight!
Remember this machine has over 250K.

Lazy...maybe but will never sell and it suits me!
mike Mojave CA
'04 ROCKSTER
RadicalR1150R
Lifer
Posts: 144
Joined: Thu May 12, 2011 4:51 pm
Donating Member #: 960
Location: Michigan

Re: Side Cover or Seat Flare

Post by RadicalR1150R »

Commonnn mannnn, really?
You do got some miles though...
kirby
Member
Posts: 771
Joined: Tue Feb 27, 2007 9:04 pm
Donating Member #: 3
Location: mojave ca

Re: Side Cover or Seat Flare

Post by kirby »

You are talking about the small cover on the right no?

I don't miss it at all....
mike Mojave CA
'04 ROCKSTER
RadicalR1150R
Lifer
Posts: 144
Joined: Thu May 12, 2011 4:51 pm
Donating Member #: 960
Location: Michigan

Re: Side Cover or Seat Flare

Post by RadicalR1150R »

My bikes red, so its the red fairing piece that starts at the end of the seat to the rear of tank, along both sides of the bike?
that thin plastic strip?
kirby
Member
Posts: 771
Joined: Tue Feb 27, 2007 9:04 pm
Donating Member #: 3
Location: mojave ca

Re: Side Cover or Seat Flare

Post by kirby »

Ah, I see said the blind man!!
No I have all the fairings except the one on the right that covers the fuel lines..about 7 " long and 4 or so inches wide at the widest.
I have replaced all the gourmets on the machine at one time or another and changed a lot of expansion nuts fasteners with hardware store stuff!!! (Like for the cooler fairings)You have to sometimes go to smaller gourmets (hole in the center) ACE is your friend there+ I have been working on aircraft for years and have a big assortment of gourmets.
Ya have to get creative sometimes!!
mike Mojave CA
'04 ROCKSTER
User avatar
sykospain
Member
Posts: 319
Joined: Sun Jun 15, 2014 10:42 am
Donating Member #: 1
Location: s.e. Med cost of Spain
Contact:

Re: Side Cover or Seat Flare

Post by sykospain »

https://postimg.org/image/qy6tyxl3f/
Every time I fiddle with the Rockster, this little cover gets harder and harder to relocate. I bet one day it'll fall off.
I noticed somewhere that Berlin only guarantees the rubber parts on a bike to last for 5 years. no longer....
This is the list of people I'd trust with my bike
kirby
Member
Posts: 771
Joined: Tue Feb 27, 2007 9:04 pm
Donating Member #: 3
Location: mojave ca

Re: Side Cover or Seat Flare

Post by kirby »

Yes that's the chap ...I had forgotten what it looked like. I still have it I think some where in my spares. I live quite nicely w/o it installed. It all started when I had an issue where the tank had to come off several time in short order. Forgot to re install and one day I was looking at the machine and it startled me for a moment that it was missing..about 3 month later.

Gourmet life....
That's about right. I about lost my little fairing over the headlight while doing 85 down the dual carriage way!!! Reached up and caught it before it came completely off.
After that I have been on a mission to replace all of the little buggers!

BTW we have the same color rock!
mike Mojave CA
'04 ROCKSTER
Post Reply